Your factory, made smart.

WAY Agent works like a team member who never stops: it shows where your factory is losing time, parts, and money, tells you how to fix it, follows through until it's done, and measures the result.

Starts with the data you already have. Nothing to install.

WAY Agent

Today

WAY Agent: Good morning. Yesterday the plant made 12,840 parts, 94.4% of plan. Line 03 fell 610 parts short: US$1,830 in lost margin.

6:00 AM

Suggested replies
Illustrative example

The plant loses. No one sees where.

The data exists, but it's scattered: in the machines, the ERP, a spreadsheet, and the shift's WhatsApp group.

LEGEND

  • Unconnected source
  • Machine signal
  • MACHINE

    CNC Lathe 07 · status

  • ERP

    WO 4521 · Line 03 · start 2:15 PM

  • SPREADSHEET

    shift_2_log.xlsx

    TimePartsNotes
    2:00 PM
    3:00 PMstopped?
    4:00 PM
  • SHIFT GROUP CHAT

    Shift 2: lathe 7 stopped again. Does anyone know why?

WHERE THE LOSS HIDES

EXAMPLE PLANT

ILLUSTRATIVE EXAMPLE

Line 03 · same part · yesterday, by shift
  1. 1st shift1,237 good parts

    OEE 71%

  2. 2nd shift872 good parts

    OEE 50%

  3. 3rd shift1,150 good parts

    OEE 66%

365 fewer good parts than the 1st shift US$1,095 in lost margin

Was it the shift, the machine or the material? Nobody knows.

Illustrative example

Shift 2 group chat

Shift 2: lathe 7 stopped again. Does anyone know why?

Yesterday, 3:00 PM

Today, 7:30 AMProduction meeting

16 h 30 min later

The question reaches the shift group at 3 PM. The answer, when it comes, is too late.

Finds it, tells you how to fix it, and follows through.

Every day, the same loop, without anyone having to remember.

LINE 03SHIFT 2WO 4521LINE 03 · START 2:15 PMWO 452107MACHINE MONITORINGTHE SYSTEM YOUR PLANT ALREADY USESERP · PLANNINGWORK ORDERS AND MASTER DATASHIFT 2SHIFT REPORTSQUALITYGOOD AND SCRAPPED PARTSPARTCOMPARED WITH THE LAST 30 ORDERSBAR STOCK LOTNEW LOT FOR WO 4521CHECK THE LOTBAR FEEDERCNC LATHE 07CHECK THE FEEDERAC‑12 · MAINTENANCE · BY 2:00 PMDONE 1:52 PMCNC LATHE 07 · YESTERDAY23 SHORT STOPS · 47 MIN · CYCLE 18% SLOWER4 SHORT STOPS · 23 BEFORECAUSE CONFIRMED: BAR FEEDER2:20 PM5:40 PM

Illustrative example

LEGEND

  • Data linked to context
  • Path of the answer
  • Confirm on the shop floor

OPERATIONAL MODEL

EXAMPLE PLANT · LINE 03

ILLUSTRATIVE EXAMPLE

  1. Finds the problem

    Reads the plant's data around the clock and shows where it lost time, parts, and money.

    Priority 01 · Production

    Short stops on CNC Lathe 07

    23 stops · 47 min · from 2:20 PM

    US$1,830 in lost margin on Line 03

    Machine states · Cycle counts

  2. Tells you how to fix it

    Points to the likely cause, shows the evidence, and says what to check first.

    Check the feeder

    The stops started at 2:20 PM, five minutes after WO 4521 began with a new lot of bar stock.

    Still unknown

    Whether the cause is the bar feeder or the bar stock lot for WO 4521.

  3. Follows through

    Turns the recommendation into an action with an owner and a deadline, reminds whoever needs reminding, and chases it until it's done.

    AC‑12

    Done

    Check the bar feeder on Lathe 07

    CNC Lathe 07

    High

    Maintenance

    Today, 2:00 PM

  4. Measures the result

    Compares before and after. If it worked, it's on record. If not, it keeps looking.

    Short stops · CNC Lathe 07

    Before
    23
    After
    4

    AC‑12 closed at 1:52 PM Cause confirmed: feeder misaligned

    And the loop starts again.

Every day at 6 AM, everyone gets what matters to them.

The same day, written for each role, on the channel it uses.

  • Owner and boardWhatsApp · 6:00 AM

    Line 03 lost US$1,830 in margin yesterday. The likely cause already has an owner and a deadline: today, 2 PM.

  • Plant managerPlatform · 6:00 AM

    Agenda for the 7:30 AM meeting: 01 Lathe 07 · 02 Scrap on Machining Center 03 · 03 Ø32 bar on Thursday.

  • Shift supervisorWhatsApp · 6:00 AM

    On your shift: the Lathe 07 feeder gets checked by 2 PM. WO 4530 moves to Lathe 05.

Illustrative example

Where it improves your plant.

It brings all your data into one place and shows where the operation is losing time, parts, and money.

  1. Illustrative example

    Calculates how much you lose to downtime, setups, slow cycles, and scrap

    Line 03: 237 machine hours lost every week. Setups alone take more than a new lathe would add.

    Line 03 · hours lost per week

    Unplanned downtime
    93 h
    Setups01
    77 h
    Short stops
    33 h
    Slow cycle
    26 h
    New lathe
    +66 h

    Scrap: 8 h · 630 h scheduled

    Illustrative case · fictional data

    DETAIL 1

    Calculates how much you lose to downtime, setups, slow cycles, and scrap

    Line 03: 6 CNC lathes, 3 shifts, Monday to Friday. On the partners' desk, a proposal for one more lathe: US$350,000.

    LINE 03 · 6 CNC LATHES · 630 H SCHEDULED A WEEKNEW LATHE · PROPOSAL AT US$350,000
    1. The problem

      Every week, Line 03 ends 3,050 parts short of plan. To catch up, it runs on Saturdays: US$4,500 each, US$18,000 a month, and it's still late. In the meeting, everyone has an explanation: it was the material, it was the operator, we need another machine.

      Owner · WhatsAppShould I close the deal on the new lathe this week?

    2. What WAY found

      Of the 630 hours scheduled each week, 237 are lost: 93 to unplanned stops, 77 to setups, 33 to short stops, 26 to slow cycles and 8 to scrap. A new lathe, running like the others, would add 66 good hours a week. Setups alone take more than that.

      Line 03 · hours lost per week

      Unplanned downtime
      93 h
      Setups01
      77 h
      Short stops
      33 h
      Slow cycle
      26 h
      New lathe
      +66 h

      Scrap: 8 h · 630 h scheduled

    3. Recommendation

      Before you sign, win that time back. Was it the material? Partly: 40 of the 93 hours of stops are machines waiting for bar stock or tools. Was it the operator? No: half of every setup is waiting. Prepare each setup the day before, while the machine runs, keep bar stock and tools at the machine, and check the feeder at every lot change, as you decided in August. In 4 weeks, I'll compare with today.

    4. Action

      Action created by WAYDone

      Line 03 with no Saturday shift

      Owner
      Plant manager
      Due
      4 weeks · reviewed every Monday

      The day before each setup, WAY Agent sends the setter the list: program, tools, bar stock and feeder alignment. It warns Purchasing before the bar stock runs out. And every Monday at 7 AM, it brings the week's lost hours: 237 → 220 → 197 → 178 → 165.

    5. Result

      After 4 weeks, Line 03 lost 165 hours a week, not 237: 72 more good hours, more than the new lathe would add. Setups fell from 77 to 45 hours, short stops from 33 to 15, and waiting for bar stock and tools from 40 to 18.

      Saturday overtime shifts a month

      41

    6. What changed in the routine

      The lathe is off the agenda and comes back in 90 days, with the numbers done: if orders grow and capacity runs short, it goes in. And setups now follow the list from the day before, not the memory of whoever knows how to set the machine.

    Want to see this in your plant?

  2. Illustrative example

    Puts a price on every loss and reveals the real margin on each order

    WO 4521 was sold at a 24% margin. After the stops and the scrap, it's at 17%.

    Margin by order

    OrderSoldActual
    WO 452124%17%−7 pp
    WO 451821%22%
    WO 453019%19%

    Illustrative case · fictional data

    DETAIL 2

    Puts a price on every loss and reveals the real margin on each order

    WO 4521, a Line 03 part for a regular customer.

    1. The problem

      WO 4521 was sold at a 24% margin.

    2. What WAY found

      With yesterday's stops and scrap, it stands at 17%: −7 pp. Nobody would see that before month-end.

      Margin by order

      OrderSoldActual
      WO 452124%17%−7 pp
      WO 451821%22%
      WO 453019%19%
    3. Recommendation

      Fix the Lathe 07 stops before WO 4521's next lot, and review the part's cost in the next quote.

    4. Action

      Action created by WAYDone

      Review the part's cost before the next quote

      Owner
      Plant manager
      Due
      Friday
    5. Result

      With the stops fixed, WO 4521 closed at a 22% margin.

      WO 4521 margin

      17%22%

    6. What changed in the routine

      The real margin of every open order shows in the 6 AM summary each day, and the part's cost is checked before every new quote.

    Want to see this in your plant?

  3. Illustrative example

    Plans production to hit delivery dates and replans when things go off track

    With Lathe 07 under inspection, WO 4530 moves to Lathe 05, and the Friday delivery still holds.

    Schedule · Line 03

    Lathe 07

    WO 4521WO 4530

    Lathe 05

    WO 4530

    Delivery · Fri

    Illustrative case · fictional data

    DETAIL 3

    Plans production to hit delivery dates and replans when things go off track

    Line 03. WO 4530 was scheduled on Lathe 07 for Thursday, for delivery on Friday.

    1. The problem

      Lathe 07 will be under inspection, and WO 4530 was scheduled on it.

    2. What WAY found

      Lathe 05 has the free capacity WO 4530 needs on Thursday.

      Schedule · Line 03

      Lathe 07

      WO 4521WO 4530

      Lathe 05

      WO 4530

      Delivery · Fri

    3. Recommendation

      Move WO 4530 to Lathe 05. The Friday delivery still holds.

    4. Action

      Action created by WAYDone

      Move WO 4530 to Lathe 05

      Owner
      Production planner
      Due
      Today, 7:40 AM
    5. Result

      WO 4530 ran on Lathe 05 and shipped on Friday, on time.

      Friday delivery

      At riskOn time

    6. What changed in the routine

      Planning now gets, with each day's plan, the machines at risk and where the load fits, before the schedule locks.

    Want to see this in your plant?

  4. Illustrative example

    Flags bottlenecks and material shortages before they hold up an order

    The 1045 steel bar, Ø32, runs out on Thursday at 10 AM. WO 4533 needs it at 2 PM.

    1045 steel bar Ø32 · stockWarning

    Runs out · 10:00 AM

    Now

    WO 4533 needs it · 2:00 PM

    Order today so WO 4533 doesn't stop.

    Illustrative case · fictional data

    DETAIL 4

    Flags bottlenecks and material shortages before they hold up an order

    1045 steel bar, Ø32, used on Line 03. WO 4533 starts on Thursday at 2 PM.

    1. The problem

      The 1045 steel bar, Ø32, is running low.

    2. What WAY found

      At the current rate it runs out on Thursday at 10 AM. WO 4533 needs it at 2 PM.

      1045 steel bar Ø32 · stockWarning

      Runs out · 10:00 AM

      Now

      WO 4533 needs it · 2:00 PM

      Order today so WO 4533 doesn't stop.

    3. Recommendation

      Order today, so the bar arrives before WO 4533.

    4. Action

      Action created by WAYDone

      Order the 1045 steel bar, Ø32, today

      Owner
      Purchasing
      Due
      Today
    5. Result

      The bar arrived on Thursday at 8 AM, and WO 4533 started on time.

      Ø32 bar for WO 4533

      Runs out at 10:00 AMArrives at 8:00 AM

    6. What changed in the routine

      Every material's stock is checked against the plan each day, and Purchasing hears before it runs short.

    Want to see this in your plant?

  5. Illustrative example

    Schedules maintenance before breakdowns, without stopping production at the wrong time

    The Lathe 07 feeder check fits into the Thursday setup, from 12:30 PM to 2 PM, when the machine stops anyway.

    CNC Lathe 07 · Thursday

    Setup Feeder check

    No extra stop: the check fits into the setup.

    Illustrative case · fictional data

    DETAIL 5

    Schedules maintenance before breakdowns, without stopping production at the wrong time

    CNC Lathe 07. The bar feeder, the confirmed cause behind AC‑12's stops.

    1. The problem

      The bar feeder on Lathe 07 needs servicing.

    2. What WAY found

      The service takes 1 h 30 min. Thursday's setup, from 12:30 PM to 2 PM, stops the machine for that long anyway.

      CNC Lathe 07 · Thursday

      Setup Feeder check

      No extra stop: the check fits into the setup.

    3. Recommendation

      Do the service during Thursday's setup, with no extra stop.

    4. Action

      Action created by WAYDone

      Check the feeder during Thursday's setup

      Owner
      Maintenance
      Due
      Thursday, 12:30 PM
    5. Result

      Serviced during the setup. Not one extra stop that week.

      Extra stop for the service

      1 h 30 min0 min

    6. What changed in the routine

      Maintenance now fits servicing into setups already on the schedule, and WAY flags when the next one is coming up.

    Want to see this in your plant?

  6. Illustrative example

    Compares how the shifts perform, and hands over shifts without losing open issues

    Same part, same line: 71% on 1st shift, 50% on 2nd, 66% on 3rd. And 3 open issues pass to the next shift.

    Line 03 · same part · yesterday

    1st shift
    71%
    2nd shift
    50%
    3rd shift
    66%

    Shift handover · 2nd → 3rd

    • Lathe 07 feeder under watch
    • WO 4533 setup on Thursday
    • New bar stock lot checked

    Illustrative case · fictional data

    DETAIL 6

    Compares how the shifts perform, and hands over shifts without losing open issues

    Line 03, the same part on all three shifts.

    1. The problem

      Same part, same line: the 2nd shift makes less than the others.

    2. What WAY found

      71% on the 1st shift, 50% on the 2nd, 66% on the 3rd. The gap is in Lathe 07's short stops after 2:20 PM.

      Line 03 · same part · yesterday

      1st shift
      71%
      2nd shift
      50%
      3rd shift
      66%

      Shift handover · 2nd → 3rd

      • Lathe 07 feeder under watch
      • WO 4533 setup on Thursday
      • New bar stock lot checked
    3. Recommendation

      Hand the shift over with the 3 open issues logged, and watch the feeder for the first two hours of the 2nd shift.

    4. Action

      Action created by WAYDone

      Hand over the shift with the 3 open issues logged

      Owner
      2nd shift supervisor
      Due
      Start of shift
    5. Result

      The following week, the 2nd shift closed at 64%.

      2nd shift OEE

      50%64%

    6. What changed in the routine

      The shift handover became a list of what's still open and what's critical, and the next shift starts with it.

    Want to see this in your plant?

  7. Illustrative example

    Finds suppliers to outsource work, or customers for your idle capacity

    Line 04 has 36 h free next week. 3 existing customers bought similar parts this year.

    Line 04 · next week

    36 h free. 3 existing customers bought similar parts this year.

    Illustrative case · fictional data

    DETAIL 7

    Finds suppliers to outsource work, or customers for your idle capacity

    Line 04, with 36 h free next week.

    1. The problem

      Idle hours turn into cost, and Sales didn't know Line 04 had room.

    2. What WAY found

      3 existing customers bought similar parts this year.

      Line 04 · next week

      36 h free. 3 existing customers bought similar parts this year.

    3. Recommendation

      Offer the free capacity to those customers by Friday.

    4. Action

      Action created by WAYDone

      Offer Line 04's 36 h of free capacity

      Owner
      Sales
      Due
      Friday
    5. Result

      2 quotes sent for Line 04's free week.

      Line 04 · next week

      36 h free2 quotes

    6. What changed in the routine

      Every Friday, Sales gets the free capacity for the coming weeks, with the customers who buy similar parts.

    Want to see this in your plant?

  8. Illustrative example

    Prepares the executive summary for the leadership meeting and keeps the management routine on track

    Monday, 7 AM: the week on one page, with losses in dollars, open actions, and what changed.

    WAY · Weekly summary

    The week on one page.

    Losses this week
    US$10,440
    Actions
    9 done · 3 open
    Biggest gain
    CNC Lathe 07: 23 → 4 short stops

    Illustrative case · fictional data

    DETAIL 8

    Prepares the executive summary for the leadership meeting and keeps the management routine on track

    The board. Monday morning's meeting.

    1. The problem

      Every Monday, the board meeting started by arguing about the numbers.

    2. What WAY found

      The week on one page: US$10,440 in losses, 9 actions done, 3 open, and the biggest gain: Lathe 07, from 23 to 4 short stops.

      WAY · Weekly summary

      The week on one page.

      Losses this week
      US$10,440
      Actions
      9 done · 3 open
      Biggest gain
      CNC Lathe 07: 23 → 4 short stops
    3. Recommendation

      Start the meeting with the open actions and the losses in dollars.

    4. Action

      Action created by WAYDone

      Open the meeting with the open actions

      Owner
      Board
      Due
      Monday, 7 AM
    5. Result

      The meeting's decisions came out with owners and deadlines, and go into next week's summary.

      Actions this week

      3 open9 done

    6. What changed in the routine

      The summary arrives every Monday at 7 AM, and the meeting starts with decisions, not with checking the numbers.

    Want to see this in your plant?

Talk to it by text, voice, or phone call.

On the platform, via WhatsApp, or by email. It remembers what was decided and learns over time.

AC‑12 · one conversation, four channels

  1. Wednesday, 7:12 AMWhatsApp · group

    Maintenance

    Maintenance supervisor

    @WAY Agent what's AC‑12?

    WAY Agent

    Check the bar feeder on Lathe 07 by 2 PM. Yesterday there were 23 short stops from 2:20 PM, right after WO 4521 started.

  2. Wednesday, 1:52 PMPhone call

    WAY Agent

    Voice call · 0:42

    Transcript

    WAY Agent Maintenance closed AC‑12: the feeder was misaligned and has been adjusted.

    Plant manager Great. Keep an eye on 2nd shift and tell me first thing tomorrow.

    Picks up AC‑12 from the maintenance group.

  3. Thursday, 6:00 AMEmail

    WAY Agent6 AM briefing

    To: Plant manager

    Subject: CNC Lathe 07: from 23 to 4 short stops

    As you asked on yesterday's call: after the adjustment, 2nd shift had 4 short stops. AC‑12 is closed.

    Does what was asked on the call.

  4. Thursday, 9:30 AMPlatform

    Plant manager

    Has this happened before?

    Remembers what was decided

    Yes, in August, after another lot change. Back then, you decided to check the feeder's alignment at every lot change. Want me to add that to the setup checklist?

    Remembers August's decision.

Illustrative example

Works with what your plant already has.

Nothing to install: WAY connects remotely to the data you already have.

Your plant No new equipment

  • Machine monitoring

    If your plant has one

  • MES

    Orders, production reports, and stops

  • ERP

    Exports or API

  • Spreadsheets

    The ones your team already uses

  • Manual records

    From paper to phone

WAY

All your data in one place

WAY Agent

Works with your team

For technical teams

Every event leaves a trail. Every loss has a cause you can trace.

Pick a point to see what links to it.

SourcesOPC UAMQTTMTConnectERP

Event

Short stop at 2:20 PM

Duration
1 min
Shift
2nd shift
Source
Machine monitoring

UNS address

example-plant/plant-1/machining/line-03/lathe-07/state

Linked to

ISA-95 hierarchy

  1. EnterpriseExample Plantexample-plant
  2. SitePlant 1plant-1
  3. AreaMachiningmachining
  4. LineLine 03line-03
  5. MachineCNC Lathe 07lathe-07

Every piece of data has its UNS address on this hierarchy.

  • Its own MES layer. WAY works alongside the MES you already use. If your plant doesn't have one, WAY brings its own.
  • Telemetry on demand. If your machines aren't monitored yet, we find a telemetry solution when it makes sense.
  • The namespace is yours. Other systems in your plant can subscribe to the same data over MQTT.

Illustrative example

A lean pilot, run by the founder.

Remote, with the data you already have, and measured against your starting point.

  1. A 30-minute call

    You tell us how your plant runs and where it loses. We tell you which data is already enough to start.

  2. Remote connection

    WAY connects to what you already have: the ERP, spreadsheets and, if you have them, machine monitoring and MES.

  3. Starting point

    WAY Agent shows where the plant loses and what it costs. That snapshot is kept to compare against later.

  4. Routine with the team

    A daily briefing, actions with owners and deadlines, and follow-up until they're done.

  5. Review on day 45

    We compare against the starting point and decide together whether to continue.

What we need from you

  • A manager in charge
  • Access to the data
  • 15 minutes a day in the routine

You tell us where your factory is losing, and we show you how WAY Agent would work in it.

Rather start in writing? Request the plant diagnostic

Frequently asked questions

Is WAY available yet?

It's in development, built together with the first partner plants. That's why you talk directly with the founder.

Do I need to install any equipment?

Not to start. WAY uses the data your plant already has, and the connection is remote.

Where does the data come from?

From machine monitoring, the MES, the ERP (exports or API), spreadsheets, and manual records.

What if the plant has no monitoring and no MES?

You can start with the ERP and spreadsheets. If it makes sense, we offer WAY's MES and find a telemetry solution for the machines.

Do I need to replace machines, the MES, or the ERP?

No. Everything stays as it is.

Does WAY touch the machines?

No. WAY recommends and follows up; your team decides and acts.

How much does it cost?

Pricing is being defined with the partner plants. On the call, we'll talk about your case.